Beneteau First 30

Additional Description

INTERIOR

• Woodwork Alpi Blond oak
• Parquet type laminated floors

COMPANIONWAY

• Headroom: 1.80 m
• Wooden companionway
• 2 Stainless steel handrails

FORWARD CABIN

• Headroom: 1.72 m
• Double bed (2.00 m x 1.51 m x 0.3 m) - Foam mattress - Fabric cover
• 2 Hanger closets / Lockers with shelves - Cubby hole lockers
• 1 Opening hatch with blackout blind

AFT WASHROOM

• Headroom: 1.82 m
• 1 Moulded shower tray
• 1 Manual marine toilet
• Washbasin with cold water mixer/shower hose under pressure
• 2 Mirrors
• Toilet accessories: Towel rail - Bin - Paper dispenser - Peg
• 1 Closed cubbyhole
• 1 Opening porthole in coaming
• 1 Opening cockpit porthole

SALOON

• Headroom: 1.81 m
• 2 Saloon bench seats - High density foam - Cover PVC
• 1 Wooden saloon table - 2 flaps
• Storage
• 2 Wooden handrails
• 1 Opening hatch with blackout blind
• 2 Opening portholes in coaming
• 2 fixed hull portholes

Additional Description

• 12V circuit
• 1 Service battery (1 x 70 Amperes) - 1 Engine battery (70 Amperes)
• Charge divider
• 12 V Electrical panel (Breaker - Voltmeter - Fuel gauge)
• 1 12 V Socket
• Lights: Halogen ceiling lights
• Navigation lights LED: 1 Three-colour lights on masthead - 1 Fire bicolor half-mast

Additional Description

• Headroom: 1.82 m
• L-shaped kitchen
• Stainless steel sink 1 Rectangular stainless steel basin
• 1 Mixer tap cold water
• 2 burners on gimbals
• 1 100 liter ice box top opening - Drained by foot pump
• 1 Cutlery drawer
• Storage - Closed cubbyholes
• 1 Bin
• 1 Opening porthole in coaming

Additional Description

• Engine YANMAR Diesel 20 hp
• Transmission Sail Drive
• Flush engine control in aluminium - Control panel in cockpit
• Engine compartment: Soundproofing foam - Ventilation: 2 air intakes and 1 pressured air outlets
• 1 Alternator 12 V 60 Amperes
• 1 Rotation moulded diesel tank 30 L, in sail locker on starboard side - 1 Deck filler
• Filters sea water diesel and decanter
• Foldaway dual-blade propeller
• 1 Engine access through companionway - 1 Access through aft cabin - 1 Access to the engine In washroom

Additional Description

• Design made following European Directive requirements and according to EC certification.
• Monolithic hull design in polyester
• Structural counter moulding made with unidirectional fabrics laminated and stuck evenly to the hull
• Injection mouulded hull (Sandwich / Glass fiber / Balsa wood / Polyester resin)
• Deck hull join screwed, stuck and banded with 1 solid wood bulwark plain
• The keel is fixed to the boat by a system of screws and stainless steel veneer
• Deep draught keel - T-shape - in cast iron
• Twin rudder on transom - Self-aligning rocker bearings
• White coloured hull - Anthracite grey hull decoration

Additional Description

RIGGING

• Standard electro-polished aluminium mast - 2 Aft swept spreaders
• Mast foot fitting - Swivel blocks
• 3 spinnaker eyes on mast
• Anodised aluminium boom
• Kicking strap - Adjusted with tiered tackle
• Standing rigging cable dyform
• Stainless steel forestay cable
• 1 Mainsail sheet track in aluminium with ball-bearing traveller
• 2 Genoa sheet tracks - Ball-bearing genoa car - Genoa sheet trim tackle - Return block
• Rigging run back to cockpit, except boom topping lift
• Complete running rigging - Genoa halyard Low Strech - 2 Twinbraided genoa sheets - Genoa sheet trim tackle - 1 Main halyard Low Strech - 1 Mainsail sheet twin-braided - 1 Mainsail foot - 2 reef lines
• Fastenings pre-fitted for spinnaker rigging
• 3 DOUBLE CLUTCH To port - 2 DOUBLE CLUTCH + 1 Single to starboard
• 6 Sheaves each side

WINCHES

• Aluminium winches Harken self tailing:
• 2 Rigging winches (H 40.2 STA)
• 2 Genoa sheet winches (H 40.2 STA)
• 2 Aluminium winch handles
• 1 Winch handle box

MOORING - ANCHORING

• Self-bailing chain locker - Clench bolt - Hatch cover
• 1 Removable roller
• 4 Aluminium mooring cleats - Stainless steel deck line protection

Disclaimer

The Company presents the information about this vessel in good faith