Sweden Yachts 45

The Sweden Yachts 45 is a quick, safe, seaworthy craft with a sumptuously relaxing interior. The advanced hull design makes her wonderfully easy to sail and maneuver. Ample locker space, plenty of hot water, a dream galley, and well-appointed heads make for great onboard living. As well, the cockpit, navigation station, and fittings will delight the most exacting crew. Sweden Yachts: Our fast, safe sailing craft originate from the demands made by both the archipelagos with their rapidly changing winds and unpredictable seas, and the heavy weather and imposing waves not infrequently produced by the mighty North Sea. Responding to the ocean's demands, Sweden Yachts constructs sailboats of extreme comfort that handle easily and require only minimal maintenance. The deck and hull are constructed of end-grain balsa core sandwiched between hand-laid fiberglass roving and mat to provide an extremely strong and rigid, yet light, construction. The teak decking is specially selected and hand-laid, bonded to the deck with polyurethane and secured by stainless steel screws. The hull and deck are bonded with polyester filler and the aluminum toe rail is bolted through the deck and hull flange before being sealed. The lead-antimony keel is secured with cast-in stainless steel bolts with a hoisting lug fastened to the keel bolts for convenient lifting. The balanced spade rudder is designed for maximum reliability, accuracy, and fingertip control, and is molded in fiberglass using roving and mat for maximum strength. The rudder stock is of stainless steel with two upper roller bearings and a bronze bearing in the heel. The quiet, smooth running Volvo Penta engines are mounted on a glass fiber bed, molded integrally with the bottom reinforcement, and filled with heavy ballast for maximum stability. The steel beam system, specially designed by Sweden Yachts, allows heavy rigging loads to be taken by the bulkheads without the need for additional internal reinforcement. In addition, the tempered glass ports have double aluminum frames. The wiring runs through conduits above the water line, while hoses are laid through ducts placed below the floorboards. Winches and heavy deck fittings are reinforced with plywood core and heavy backing plates. The stainless steel mast step is bolted to the integrated bottom reinforcement system which absorbs and distributes forces from the mast, rigging, and keel.