Beneteau Oceanis 352

Specifications

Beneteau 352

Name.................................................... Caribbean Blue 

Year....................................................................... 1994

Builder................................................ Beneteau Yachts

Designer.......................................... Berret-Racoupeau

LOA...................................................................... 34’6”

LWL...................................................................... 30’5”

Beam.................................................................... 12’6”

Draft...................................................................... 4’11”

Displacement.................................................... 11,684lb

Ballast................................................................ 3,748lb

Sail Area .......................................................... 526sq/ft

Hull ...............................................................Fiberglass

Deck............................................................. Fiberglass

Steering.............................................................. Wheel

Keel.......................................................... Fin Cast Iron

Rudder................................................................ Spade

Fuel...................................................................... 20gal

Water.............................................................. 2 x 50gal

Hot Water.............................................................. 6 gal

Holding Tank........................................................... Yes

Heat...................................................... Webasto diesel

Headroom............................................................... 6’3”

CONSTRUCTION

• Hull and topsides: Molded CRP single skin
• Bilge stringers: Molded CRP liner/structural grid
• Bolt on cast iron keel
• Deck: Molded CRP over cored sections

INTERIOR

• Spacious 2 cabin 1 head layout
• Cherry-stained Mahogany interior finish
• Cream leatherette upholstery
• Good natural light and ventilation through opening ports, skylights and hull windows
• Salon: U-shaped settee and dinette table to starboard
• Long bench style settee to port
• Storage under and behind the seating, shelving outboard
• Chart table: full size aft facing utilizing the settee seat 
• Storage in the desk
• Systems at the chart table: AC and DC distribution panels, Chartplotter, VHF, Webasto heat thermostat, stove solenoid, stereo
• Galley: L-shaped to port aft
• Large top loading fridge/freezer with prep counter
• Double sink with pressurized hot/cold water
• Two burner propane stove with oven
• Storage below counter and outboard of stove
• Fwd cabin: V-berth double, with shelves outboard
• 2 x hanging lockers with shelves
• Overhead opening hatch
• Aft Cabin: Double berth
• Lockers, hanging locker and stowage space
• Opening hatch and fixed hull port
• Reading lights
• Head: headroom 6’1”
• Compartment molded in one piece for easy cleaning
• Vanity with basin, mirror and storage
• Pressurized hot/cold water
• Integrated Shower with sump pump
• Manual Jabsco toilet to holding tank

MECHANICAL

• Perkins Diesel, M30, 3 cylinder, 30hp
• Racor fuel filter
• Cooling: Fresh water heat exchanger
• Propeller: 3 blade bronze
• Prop shaft: Stainless steel
• Rubber cutlass bearing, QL dripless stern gland

ELECTRICAL + PLUMBING

• Shorepower: 30amp
• 12VDC and 110VAC systems with circuit breakers
• Master switches for Engine start and house batteries
• House Batteries: 4 x golf cart lead acid
• Start Battery: 1 x GRP27 sealed lead acid
• Battery charger: Xantrex True Charge 40+
• Galvanic Isolator: Prosafe FS 30
• Water tanks: 2 x CRP
• Hot/cold pressurized water
• Hot water tank: Seaward heated by engine and 110V
• Manual marine toilet, macerator, holding tank
• Holding tank: plastic
• Propane system replaced (2023)

 INSTRUMENTS

• Chartplotter: Standard Horizon CP 180
• Depth/speed: Raymarine tridata
• VHF: ICOM M402

 SAILS & RIGGING

• Fully battened Mainsail with stack pack (2009)
• Furling genoa with Harken furler
• Spinnaker with whisker pole
• Mast: Aluminum double spreader deck stepped
• Boom: Aluminum
• Standing rigging: SS 1X19 wire
• All running rigging leads aft to cockpit 
• Primary winches: lewmar ST #44 
• Halyard winches: Lewmar ST #30
• Adjustable pin stop genoa cars on tracks

 DECK GEAR & COCKPIT

• Life Lines: SS stanchions, double SS lifelines
• Windlass: Lofrans Cayman 12VDC (2017)
• Anchor: Bruce #33, 160’ 5/16” chain, 300’ 5/8” rope
• Second anchor: CQR 35lbs, 30’ 5/16” chain, 200’ rope
• Aluminum tow rail
• Fold down skippers seat to walk through transom
• Folding swim ladder
• Fiberglass molded cockpit table with two fold up leaves, storage in the center
• Single wheel with binnacle, includes electronics and engine controls and gauges
• Teak on cockpit seats

 ADDITIONAL EQUIPMENT

• Dinghy Davits: Ocean Marine (2017)
• Dinghy: AB AL9 RIB Hyperlon (2017)
• Dinghy cover
• Outboard motor: Nissan 6hp
• Outboard motor lift  (2017)
• Full cockpit enclosure (2014) 

MAINTENANCE

• Last haul-out and anti-fouling: 2022 dived and cleaned every year since
• Last zinc(s) change: 2025

Disclaimer

The Company offers the details of this vessel in good faith but cannot guarantee or warrant the accuracy of this information nor warrant the condition of the vessel. A buyer should instruct his agents, or his surveyors, to investigate such details as the buyer desires validated. This vessel is offered subject to prior sale, price change, or withdrawal without notice.