Pacific Seacraft Cutter

1988 Pacific Seacraft 37 - "Synergy"
Overview
"Synergy" is a 1988 Pacific Seacraft 37, a classic cutter-rigged sailboat designed by the renowned W.I.B. Crealock. Known for its robust construction and seaworthy design, the Pacific Seacraft 37 is a favorite among serious ocean-going sailors. "Synergy" offers a perfect blend of traditional aesthetics and modern upgrades, making it an ideal choice for long-term cruising or coastal adventures.
Dimensions
Length Overall: 37ft
Beam: 10.83ft
Draft: 5.50ft
Sailboat Specifications
Hull Type: Fin with rudder on skeg
Rigging Type: Cutter
LOA: 36ft 11in / 11.25m
LWL: 27ft 9in / 8.46m
Sail Area: 758.00 ft² / 57.41 m²
Beam: 10ft 10in / 3.30m
Displacement: 16,000 lb / 7,257 kg
Ballast: 6,200 lb / 2,812 kg (Lead)
Max Draft: 5ft 6in / 1.68m (deep keel)
Construction: Fiberglass (FG)
First Built: 1980
Builder: Cruising Consultants Inc. / Pacific Seacraft (USA)
Designer: W.I.B. Crealock

Engine
Engine Make: Yanmar
Engine Model: 4JHE
Total Power: 44hp
Engine Type: Inboard
Drive Type: Direct Drive
Fuel Type: Diesel
Hours: 5600
Sails and Rigging
Fully Battened Mainsail
Spinnaker with Sock Furling Genoa
Storm Jib
Tiller Steering

Electronics
Depthsounder Radar with AIS
Wind Speed and Direction Instruments
Radio
Compass

Other Equipment
Electric Bilge Pump
Manual Bilge Pump
Electric Winch
Gimbal Stove and Oven
Marine Head
Air Conditioning: Mermaid M-16 16K BTU
Monitor Windvane

Recent Upgrades
Air Conditioning Overhaul:
o New water pump
o New circuitry
o New thermostat
o New water piping configuration for easy strainer isolation and pump priming
Fridge Service:
o Replaced sensors
Internal DC Systems Overhaul:
o Replaced all installed fans
o Upgraded all interior lights to LED red/white selectable units
o Removed obsolete equipment for system simplification
o Replaced potable water pump
A/C Electrical Overhaul:
o Replaced all breakers
o Installed new GFCI outlets
o Rewired inverter for battery charging by solar and shore tie
Exterior Upgrades:
o New aft topside paint
o Steam cleaned interior cushions
o New dock lines
o New fenders
Engine Upgrades:
o New engine water pump
Repair History
Exterior:
o Shortened anchor chain (2011)
o Bottom job, zincs replaced, stuffing box repacked (2013, 2020)
o New dodger and bimini (2017)
o New aft topside paint (2020)
o Rudder removed, inspected, and re-installed (2020)
Engine:
o Raw water pump rotor replaced (2013)
o Fuel tank removed, hoses replaced, lift pump installed (2017)
o Exhaust mixing elbow replaced (2017)
o Transmission rebuilt (2019)
o Cutlass bearing and stuffing box hose replaced, prop shaft inspected (2020)
Electrical:
o Batteries replaced with wet cells (2013, 2018)
o Solar panels and controller replaced (2017)
o Forward battery relocated (2018)
o New alternator (2019)
Rigging:
o Muir windlass rebuilt (2014)
o Standing rigging wires replaced (2020)
o Mast rewired, new deck/steaming light, new windex (2020)
Plumbing:
o Bronze head rebuilt (2016)
o New toilet (2019)
Experience and Adventures
"Synergy" has a rich history of adventure, having made numerous trips to the Abacos from 2001 to 2013. She is well-equipped and maintained, making her ready for new adventures and open waters.
This Pacific Seacraft 37 "Synergy" represents an exceptional opportunity for those seeking a proven, well-maintained bluewater cruiser. Whether you're planning to explore distant shores or enjoy coastal cruising, "Synergy" is equipped to take you there in safety and comfort.
For more details or to arrange a viewing, please contact Larry Broome directly at 321-432-7236.