Cascade 36

The Cascade 36 is a monohull cutter designed by Robert A. Smith and built by Cascade Yachts in Portland, Oregon. Ursa is a One Cabin Layout that can sleep up to six.  The boat also has a fin keel and a spade rudder, which give it good maneuverability and stability. The boat is steered by a single wheel in the aft cockpit tucked away under the hard Dodger, which has plenty of space for seating and storage.  Bow Sprit added for larger Genoa and Staysail option.  

• Hull Type: Fin w/spade rudder 
• Rigging Type: Cutter
• LOA: 35.56 ft / 10.84 m
• LWL: 28.87 ft / 8.80 m
• S.A. (reported): 590.00 ft² / 54.81 m²
• Beam: 10.00 ft / 3.05 m
• Displacement: 12,500.00 lb / 5,670 kg
• Ballast: 4,433.00 lb / 2,011 kg
• Max Draft: 5.60 ft / 1.71 m
• Construction: FG
• First Built: 1967
• # Built: 63 out of 156
• Builder: Yacht Constructors Inc./Cascade Yachts (USA)
• Designer: Robert Smith

Accommodations:

• 6’4” Headroom
• Sleep Seven
• 12 Opening Port Hatches
• 2 Large Overhead Hatches
• L Shape Dinette with Storage
• Dinette Converts to Double Berth
• Long Settee
• Teak Flooring
• Force 10 Cozy Cabin Bulkhead Heater (Propane)
• Dedicated Chart Desk
• V Berth
• Aft Single Berth

Galley:

• U Shape Galley
• Laminate Counter
• Double Deep S/S Sink
• Three Burner Propane Stove and Oven
• Top Loading Refrigeration
• 6 Gallon Hato Water Heater

Head:

• Marine Head 
• Y Valve from Holding tank to direct overboard
• Shower
• Paragon Hot and Cold Pressurized Water Pump

Electronics:

• Simrad Chartplotter (2013)
• Raymarine Pathfinder SL70 Radar
• Raymarine Evo Wheel pilot Autopilot (2013)
• Vespar Marine XB-8000 AIS Transponder w/WIFI (2013)
• Standard Horizon VHF
• Datamarine Depth Sounder
• Stereo w/Infiniti Speakers
• Airmar In-Hull P79 Transducer (2013)
• Airmar DST 800 NEMA 2000 Transducer (2013)

Electrical:

• Shorepower 110v
• Battery Charger/Inverter Freedom 10
• AGM Group 27 Starting Battery
• AGM Group 27 House Battery (Two)
• 4GC AGM 6 Volt
• Balmer ARS-5 Multistage Voltage Regulator
• Balmer 90 Series 90 AMP Alternator
• Spectra 200c Watermaker

Sails and Rigging:

• Hasse & Petrich Mainsail
• Hasse & Petrich 130% Genoa
• Hasse & Petrich 110% RF Genoa
• Hasse & Petrich Staysail
• Hasse & Petrich 100% Jib (Hanked On)
• Hasse & Petrich Trysail
• Hasse & Petrich Drifter
• ProFurl Furling Unit (2013)
• Mast Head Rig w/Double Spreader
• Trysail Track
• Whisker Pole
• Adjustable Running Backstays
• Inner Forestay w/Quick Release Lever
• Harken Traveler
• Lewmar Self Tailing Winches

Canvas:

• Full Enclosure Canvas 
• Weather Cloths 
• Mainsail cover
• Anchor Windlas Cover
• Winch Cover
• Helm Cover
• Hatch Covers
• Bimini
• Hard Doger

Safety:

• Manual Windlass
• CQR Anchor w/300’ Chain and 100’ Rope
• LP Safety Control
• Scanmar Monitor Windvane

Additional:

• Awgrip Hull and Topsides (2013)
• Standing Rigging (2013)
• Running Rigging (2013)
• Custom Radar Pole
• Paragon Jr Pump rebuilt with parts