Ferretti Yachts 72
Contact Seller
XPresented For Sale By:
| Make | Ferretti Yachts |
|---|---|
| Model | 72 |
| Year | 2000 |
| Condition | Used |
| Price | €700,000 |
| Type | Power |
| Class | Flybridge |
| Length | 72 ft / 22 m |
| Fuel Type | Diesel |
| Hull Material | Composite |
| Location | Olbia, Sassari, Italy |
| Tax Status | Tax Paid |
| LOA | 72 ft 3 in / 22.03 m |
|---|---|
| Beam | 17 ft 12 in / 5.48 m |
| Engine Type | Inboard |
|---|---|
| Engine Make | MAN |
| Engine Model | D2842LE404 |
| Fuel Type | Diesel |
| Engine Year | 2000 |
| Power | 1300 hp |
| Drive Type | Shaft Drive |
| Propeller Type | 4 Blade |
| Propeller Material | Bronze |
| Engine Type | Inboard |
|---|---|
| Engine Make | MAN |
| Engine Model | D2842LE404 |
| Fuel Type | Diesel |
| Engine Year | 2000 |
| Power | 1300 hp |
| Drive Type | Shaft Drive |
| Propeller Type | 4 Blade |
| Propeller Material | Bronze |
| Additional Equipment |
|
|---|---|
| Covers |
|
| Electrical Equipment |
|
| Electronics |
|
| Inside Equipment |
|
| Outside Equipment/Extras |
|
| Builder | Ferretti |
|---|---|
| Hull Shape | Planing |
| Hull Warranty | None |
Description
ENG
Elegant Ferretti 72, spacious and refined with 4 comfortable cabins: 1 Master, 1 VIP Cabin, 2 Twin Cabins all en-suite. The elegant, minimal, and refined interiors are enveloped by large windows that provide great brightness to the environment; the spacious double salon is equipped with comfortable sofas and an internal table to accommodate 8 guests with a separate and well-equipped kitchen, featuring a refrigerator, oven, dishwasher, and washing machine. The crew area is separate, with access from the stern. The ample sunbathing areas at the bow and stern are equipped with comfortable cushions for maximum comfort; the flybridge offers a large relaxation area with an additional outdoor dining table, wet bar, and sofa, all under the shade of a large cover. A comfortable and large swim platform offers easy access to the sea. In the 2020 and 2024 Maite underwent a rich internal and external refitting, including a complete polishing of the hull, new teak for the steps to the flybridge, new carpeting throughout the main deck, and new alcantara coverings for the walls of the sleeping area.
Disclaimer
The Company publishes the details of this vessel in good faith and cannot therefore endorse or guarantee the accuracy of such information.
Complete teak deck refurbishment works
Replacement of all onboard electronics Plotter RAYMARINE AXIOM + Quantum Radar Antenna + CP 370 Engine Room Camera
Replacement of internal and external lighting with LED lamps New fire-fighting system in the engine room
New Quick 60A three-output battery charger for charging engines and stern propeller batteries - Installation of a new parallel battery disconnect switch for generator batteries - Overhaul of the multipurpose pump New electrical and antenna lines for the installation of new TVs in the guest cabins at the bow and sides - replacement of WC discharge pipes - installation of a new black water pump - new 40lt water heater - Installation of a new 5000W inverter with automatic connection to outlets in the absence of 220V power supply - installation of foot buttons for bow winches - EPIRB - VHF model Ray 90 with second handset - Passive GPS antenna - AIS and SSB
Installation of a drawer refrigerator in the dinette cabinet
Repair of the crew entrance door, Nemo door with replacement of the complete external panel with push button and power key
Replacement of fan coil filters and installation of screens on aluminum grilles
Installation of a new 19 Kw Onan generator with installation of a new exhaust system complete with gas/water separator installation of the control panel in the bridge, replacement of the 220 volts wiring suitable for 19 Kw, installation of a complete overboard discharge with fittings and valve
Installation of a 220 Volt autoclave pump, equipped with an electronic pressure switch with repositioning modification and restructuring of the pipe and valve system to make the two pumps independent in case one fails
Replacement of the black water float with a functioning test, adjustment flange with holes and stainless steel threads, (new sensors have a different flange than the existing one on board) installation on the water system of a T, valve and hose holder to connect the washing hose.
Dismantling of the two rudder blades for modification, widening the blades by 4/5 cm. With replacement of the order-ring water seal.
Complete overhaul of the air conditioning at CONDARIA modification of the air conditioning cooling system discharge with installation of a bronze through-hull fitting complete with fittings and valve, modification of the system with new spiral armored tubing
Dismantling of the oil seals for overhaul, replacement of all O-rings
Replacement of engine room ceiling lights with LEDs
Installation of 7 step marker lights on the flybridge stairs from the cockpit
Refurbishment of the flybridge dashboard panels, front panel with new layout, redesigned, with gray film, flat panel with all accessories from various switches and toggle buttons, and new engine start and stop buttons, with all the silkscreen printing of the utilities and the perimeter thread and the Ferretti logo, two ceiling panels in the cockpit command for the gangway on one side and spoiler control, new spoiler lights and new stair lights. Refurbishment of the gray dashboard panel with Ferretti logo
Mosquito nets for cabin portholes
Control and overhaul of valves, pistons, and sleeves
Refurbishment of the hull brought to zero
Dismantling of the main engines heat exchangers and intercoolers sectioning, washing and cleaning parts reassembly with the replacement of the respective gaskets and reassembly to the engines
Dismantling of injection pumps for bench testing and reassembly; - dismantling of injectors, replacement of pushrods
Pump overhaul with replacement of magnet and bearings
Dismantling of the main engines fresh water and salt water pumps; - sectioning of the same, washing and cleaning parts; - reassembly with replacement of pump overhaul kits, reassembly to the engines
Control of turbine axial and radial play
Dismantling of cups, replacement of gaskets and replacement of oil pump pressure valves
Dismantling of the gearbox dismantling of the engine flywheel for the replacement of the oil seal
Dismantling of distribution gaskets dismantling of oil exchanger gaskets
Replacement of engine exhausts
Dismantling / reassembly of engine exhausts - dismantling / reassembly of the starter motor - control of pushrod play - sandblasting and painting of engine parts
Overhaul of the Starter Motor
Control - ultrasonic cleaning - injector calibration
Control of engine alignment (after mounting shafts and seals)
Overhaul of Turbines
Replacement of secondary sea inlets
Refurbishment of Fly sofa
Replacement of hydraulic pipes for the gangway and crane Replacement of Sub Lights
Replacement of Idromar Desalination Unit 180Lt/h
Tender Lomac with Teak floor and Suzuki 20hp engine
Replacement of the left anchor windlass and overhaul of the right with new chains 105mt and 75mt
Installation of illuminated boat name
Replacement of main sea outlets with wheel controls Total replacement of internal carpets
Refurbishment of corridor fabric in cabins
Replacement of Tridata
Polishing of hulls and deck sides
Complete engine service with dismantling and washing of exchangers
Presented For Sale By:
Presented For Sale By:
Services
- InsuranceInsurance
