Shannon Cutter

Addition Details

HULL ID. NUMBER: NHN38098O485 HULL BUILD NUMBER: 98
YEAR/MAKE/MODEL OF VESSEL: 1985 38’ SHANNON, 380 CUTTER WITH NAVTECH ROD RIGGING

BUILD MATERIAL: FIBER REINFORCED PLASTIC, SOLID FRP TRIAXIAL ROVING SATURATED W/ POLYESTER RESIN SOLID WET AREA, SANDWICHED AKUME PLYWOOD DECKS & SUPERSTRUCTURE    
GROSS DISPLACEMENT: APPROX. 21,000 LBS. LENGTH OVERALL: 42’07” LENGTH WATERLINE: 30’10”

BEAM: 11’6” DRAFT: 5’ 0” DRY WEIGHT: 18,000 LB. BALLAST: 8,000 LB. HEIGHT CLEARANCE: REPORTED 59’ 10”

RAKED BOW, ROUND CHINE, TRADITIONAL BACK ANGLE STERN, TRUNK CABIN, FULL KEEL, UNBALANCED SKEG RUDDER, CUTTER RIGGED SAIL W/ROD RIGGING, KEEL COMPRESSION MAST USING DECK PARTNERS, WHEEL STEERING, AFT COCKPIT

MAIN POWER: PERKINS, 4-CYLINDER, NON-TURBO DIESEL, 4-108, 47 HP@2800 RPM, HOURS: 2381.3

AUX. POWER: 1 EA. 100 AMP BELT DRIVEN BALMAR ALTERNATOR, EXTERNAL REGULATOR, NEWMAR 150-WATT INVERTER, LINK 10 FOR ENG. MONITORING, LINK 20 FOR HOUSE SYSTEMS MONITORING, PRO MARINER, PRO-TECH  12/30 MULTI LINE CHARGER, XANREX PATHFINDER BATTERY COMBINER

EXTERIOR COLOR AND TRIMS: OFF-WHITE ISO/NPG GELCOAT WITH BEIGE TRIM, WHITE SAILS, BLUE ANTI-FOUL
PAINT WITH BROWN ACRYLIC ENAMEL SHEER TRIM, GOLD COVE STRIPPING

LAYOUT:  CUTTER RIGGED, AFT COCKPIT WITH WRAP AROUND SEATING, AMIDSHIP SALON, FORWARD AND AFT STATEROOMS, WITH FWD HEAD WITH STALL SHOWER, HANGING LOCKERS, NAVIGATION AREA, COMPANIONWAY WORK AREA, TEAK BULKHEADS AND CABINETS, PANELED TEAK & HOLLY FLOORING, CONVERTIBLE DINETTE, WITH SETTEE BOTH SIDES, PORT AMIDSHIP FULLY EQUIPPED GALLEY, UNDER AFT COCKPIT ENGINE SPACE.

STANDING RIGGING: ISOMAT EXTRUDED ALUMINUM MAST, W/INTERNAL HALYARDS, SLUGGED TRACKED VERTICAL ROLLER MAIN SAIL, ROLLER FURLER BOTH HEAD SAILS, SINGLE SPREADER, BELOW DECK COMPRESSION STEPPED KEEL USING DECK SPARTITE. ISOMAT 16’ BOOM, W/ INTERNAL ADJUSTMENTS, WITH DOWN & OUTHAUL HARDWARE, TOE-RAIL MOUNTED NON-EXPOSED CAST INTEGRATED SUSPENDER CHAIN PLATES, HEAD & BACK STAYS 3/8” STAINLESS ROD, 5/8” CHROMED BRONZED TURNBUCKLES, UPPER SHROUD 5/16” STAINLESS ROD 5/8” TURNBUCKLE, LOWER SHROUDS 5/16” STAINLESS ROD 1/2” TURNBUCKLES, HYDRAULIC STAINLESS ROD BACK STAY W/QUESTUS RADAR LEVELING MOUNT, DECK MOUNTED TRAVEL AND CAR TRACKS, W/5: 1 MAIN, 

WINDLASS/WINCHES: LEWMAR, CAPSTAN DRUM, 12 VDC, 1,200-WATT, FOOT & HELM CONTROLS. CHAIN STOPPERS DOUBLE DAVITS, MAIN BREAKER IN SALON ON MAIN DISTRIBUTION PANEL UNDER PORT SETTEE, ALL TESTED GOOD

ANCHORS AND RODES: 1 EA. 35# DANFORTH FLUKE, IN DAVIT SECONDARY, 1 EA. QCR 45# PLOW, AS PRIMARY. PROPERLY SIZED FOR APPLICATION, APPROX. 250’, HI-TENSILE, BBB 5/16” GALVANIZED MARINE GRADE CHAIN ON PLOW ANCHOR, APPROX. 100FT. GALVANIZED CHAIN WITH APPROX.200’ ¾” NYLON 3 BRAID ROPE.

     

Disclaimer

The Company offers the details of this vessel in good faith but cannot guarantee or warrant the accuracy of this information nor warrant the condition of the vessel. A buyer should instruct his agents, or his surveyors, to investigate such details as the buyer desires validated. This vessel is offered subject to prior sale, price change, or withdrawal without notice.