Presented For Sale By:
|Length||36 ft / 10.97 m|
|Location||Marathon, Florida, United States|
|LOA||35 ft 4 in / 10.77 m|
|Length at Water Line||26 ft 6 in / 8.08 m|
|Beam||10 ft 12 in / 3.35 m|
|Min. Draft||5 ft 6 in / 1.68 m|
|Designer||Holman & Pye|
Wonderfully spec'ed Rustler 36 delivered in 2013. She is the most recent to be built. She has been sailed up and down the East Coast of the US. A great alternative to new and ready to go!
Offered to co-brokers on a commission split of 50/50.
ADAMANTINE is hull 123 and is the last Rustler 36 to be built so far, and was sold by us as a custom order by her current owners. Very nicely spec’ed - it has a full teak interior, blue gelcoat hull, tiller steering and the larger engine.
Since delivery, the owners have made many more upgrades, and the yacht is offered as a complete package with a tender. Since shipping over from the UK, she was based initially in Rhode Island, and then the Chesapeake area for many years. A year ago she sailed to Florida, where her owners now live.
Rustler 36s have become iconic and are the ‘must have’ yacht if you want to enter the Golden Globe Race; Rustler 36s were 1st, 2nd and 3rd last time, and about 9 have entered the next race.
A very special yacht and the newest you can buy, unless you order a brand new one.
Like all Rustler 36 owners, we love the boat, and have had many great sails on ADAMANTINE. The build quality is fantastic and we feel safe and secure on the boat in bad weather. We have now retired and moved to Florida, and so, sadly, now is the time to sell our beloved boat.
RCD Status: The yacht conforms with the essential safety requirements of Directive 94/25EC or RCDII (2013/53/EU as appropriate (Recreational Craft Directive) and is categorised A – “Ocean”.
Hull, Deck & Superstructure Construction:
- Hand Laid GRP to Lloyds Register specifications and using Lloyds approved materials.
- The hull has a double gel coat (clear below the waterline), with first lay‐up in Scott Bader 489 thixotropic, isophalic resin with matched chopped strand mat for maximum resistance to porosity and tropical conditions. The remainder is in 414PA with matched chopped strand mat and woven rovings.
- Hull moulding colored navy blue, white boot top, gold coveline.
- Lay‐up weights are: Deck –3150g; Topsides – 3900g; Turn of bilge – 5100g stepped to 6900g and increasing to 8700g at the keel. Strengthened by two longitudinal, glassed in stringers.
- Coachroof and inner coamings are stiffened with 12 mm balsa core and all deck fittings are reinforced by 12mm marine ply pads.
- The hull and deck and bonded and the toe rail is through bolted and sealed.
- All bulkheads and furniture units are securely glassed to the hull on foam grounds, to form a matrix of strategic stiffening. Moulding is carried out in carefully controlled conditions with quality checks at all stages, ensuring correct lay‐up procedures and high standards of workmanship throughout.
- The ballast is a lead casting comprising of 3.4 tons, and fully encapsulated in the keel.
- Transom strengthened for hydrovane wind steering gear.
Keel & Rudder:
- Encapsulated lead full keel with cut away forefoot.
- Transom hung heavy duty teak rudder with tiller steering.
Engine & Gearboxes:
- 1 x Nanni N3.30 (37hp) diesel engine (bigger than standard).
- 2.75:1 mechanical gearbox.
- Engine is flexibly mounted with built‐in drip tray.
- Cooling by means of seawater, cooling a closed freshwater system through a heat exchanger.
- Cooling water is injected aft of the engine and through an exhaust water trap. A flexible exhaust hose connects the exhaust, via a swan neck, to the outlet valve fitting aft.
- Engine compartment is insulated with non-combustible foam sound deadening material.
- Ventilated by a fan.
- Single lever control.
- Halyard exhaust amlert system.
Maintenance & Performance:
- Engine hours – approx. 1,000.
- Cruising speed – approx 6 kts.
- Maximum speed – approx 7.5 kts.
Propulsion & Steering:
- A 1 1/4" diameter stainless steel shaft is fitted connected to the engine via a flexible coupling.
- The shaft drives a fixed 3‐bladed 16" x 13"(40.6cm x 33cm) propeller.
- Featherstream prop.
- The stern tube has a conventional stuffing box at the inboard end with a water feed from the raw water system and a cutlass bearing at the outboard end.
- 4 x 110V sockets.
- 2 x 12V sockets (to chart table and cockpit).
- Custom Rustler main switch panel is protected by contact breakers.
- 3 x 115A AGM Rolls batteries.
- 1 x 55A Red flash engine start battery (high cranking).
- Isolating switches with link between engine and service bank for emergency starting.
- Adverc with X spot link switch between service and engine battery banks.
- 1 x Mastervolt 12/35-3 Chargemaster.
- 3.8 Kva Isolating transformer.
- Batteries charged from 100A engine alternator.
- 40ft 30 Amp shore power cable.
- All wastes and seawater pipes are reinforced PVC.
- Freshwater pipes are non‐toxic polybutylene. All flexible pipe connections are made with stainless steel hose clips.
- bronze Blakes seacocks and skin fittings.
Fresh Water & Water Heating System:
- Hot water tank 10 gallon with 110v immersion heater element.
- Hot water heated by engine.
- Seawater foot pump to galley.
- Pressurised hot and cold water.
- 2 x Henderson MkV pumps, one in cockpit adjacent to helm position and one down below.
Grey & Black Water:
- Holding tank for head.
- Deck and overboard pump out.
- Total capacity of 40 gallons (182 litres) in a stainless steel tank.
- Tank filled from the side deck and vented outboard.
- Isolation valve fitted to tank and contents are measured by a site gauge.
- A primary filter/water separator is fitted in addition to the engine fuel filter.
- Fuel spill‐off is returned to the tank.
- Total capacity of 55 gallons (250 litres) in 2 x stainless steel tanks.
- Tank fitted with baffles, inspection hatch and dip stick.
- Filled from side deck and vented outboard.
- Gas bottles are stored in a vented cockpit locker.
- Piping is copper tube with bulkhead fittings at each end.
- Connections to regulator and cooker are with flexible hoses and an additional isolation valve is fitted by the cooker.
- Twin bulkhead mounted compasses, port and starboard in cockpit.
- Raymarine ST60 Speed, depth and wind instruments to the companionway instrument pod.
- Fully gimballed cooker with twin burners, oven and grill.
- Fridge unit with keel cooled compressor unit.
- 1 x Lavac marine toilet.
- Hand held shower.
- Sink with hot and cold water.
- Halogen 10W flush lights throughout.
- Reading lights to saloon.
- Dual red/white lights to heads.
- Red courtesy lights to chart area, galley and companionway steps.
- Chart light in navigation area.
- Additional switchable white lights to chart table and pilot berth.
- 3 x Imtra Ventura Bi colour LED lights (galley, chart table and in heads).
- Aquasignal LED Tri light with anchor.
- Aquasignal port/starboard and stern LED lights.
- 1 x 25 watt bi‐colour bow light.
- 1 x 25 watt tri‐colour masthead navigation light combined with 10 watt all‐round white light; one 10 watt stern light; 1 x 25 watt steaming light.
- 1 x 35 watt sealed beam deck light.
Summary of Accommodation:
- 5 berths in 2 cabins + saloon.
- The emphasis is on a practical cruising layout, generously proportioned, with full standing headroom and plenty of secure stowage throughout.
- Teak interior throughout.
- The interior joinery is constructed from high quality materials and in accordance with good yacht practise.
- The joinery and sole are oak veneered plywood. Solid timber, of high quality oak, is used where appropriate. All oak surfaces are finished with a matt satin varnish.
- The hull above the waterline and the deck head are lined with offwhite vinyl or material where appropriate.
- All locker doors and drawers have secure finger catches.
- Hanging lockers have rails and hooks.
- All cabin doors are fitted with high quality furniture and retaining catches where necessary.
- Soles have access hatches where necessary.
- Berths are fitted with lee‐clothes.
- Standard foam mattresses fwd and aft with memory foam topper.
- Composite foam cushions.
- Lee cloths are standard on sea berths.
Description of layout from forwards:
- V twin berth with infill to convert to double.
- Wooden slats.
- Full headroom and dressing space.
- Vanity unit with drawer and shelved locker.
- Full length shelves port and starboard.
- Split cushions to give access to locker space below berths.
- Lewmar Ocean hatch and Dorade vent.
Heads (To Port):
- GRP self‐contained white moulded compartment. Being both bright and airy whilst easy to clean.
- Large amount of storage space within 4 lockers.
- Lavac marine toilet positioned athwart ships for easier use when heeled.
- Large deep wash basin.
- Full standing headroom.
- Fixed coach roof window with Lewmar hatch over.
- Dorade vent.
- Pressurised hot and cold water with shower.
- Shower tray electrically pumped out overboard.
- L shaped settee to port with double berth conversion.
- Settee berth to starboard.
- Central table, room for six with full access around, even when fully extended and incl. bottle stowage within.
- Lockers to port and shelving starboard behind settees.
- Easily accessed under berth lockers.
- 4 x Eyeball spot lamps, recessed with adjustable positioning.
- Functional U shape for safe use at sea.
- Avonite counter tops.
- Large stainless double sink.
- Galley strap and cooker crash bar.
- Chopping board over cooker.
- Extensive and accessible stowage.
- Pressurised hot and cold water via mixer tap.
- Manual back‐up via galley foot pump.
- 12v fridge with keel cooler
- Nelson Propane stove with oven.
- Hatch above.
Navigation Area (To Port):
- Chart table large enough for folded Admiralty charts.
- Chart stowage under lift up table top.
- Storage beneath chart table.
- Customised switch panel with circuit breakers.
- Locker next to seat for Pilot book etc.
- Room for additional instruments and/or electronics.
- Hatch above.
- Practical sea going single quarter berth with lee board and wet locker, converts to a double berth in harbour by dropping the lee board and setting the infill cushion.
- There is an opening port light to the cockpit.
- The cockpit is spacious, secure and comfortable, yet not too open to be a hazard in rough conditions.
- Instruments in cockpit include tachometer, oil pressure and temperature audible alarm, alternator warning light, starter switch and stop control.
- Cockpit table.
- Sliding companionway hatch and garage in perspex with two teak storm boards.
- It is self‐draining via one and a half inch cross over drains fitted with seacocks.
- There is an additional two and a half inch dump drain aft.
- Large locker to starboard with shelving.
- Gas locker which self-vents overboard.
- 2 propane tanks.
- Solenoid valve.
- Hinged tiller in Iroko.
- Safety line attachment points.
- Cockpit shower
- Selden mast, deck stepped with twin spreaders.
- Selden batten car system.
- Spinnaker pole track and heel lift system.
- Internal main and jib halyards with outlets above and below winch.
- Internal electrical wiring with exits forward.
- Selden boom with single line reefing lead back to cockpit.
- Rod Kicker.
- Standard rigging in stainless steel.
- Fore and Backstay in 8mm 1 x 19ss wire with swaged end mast fittings.
- Cap shrouds lead direct from masthead.
- Lower shrouds from the spreader root.
- All rigging fitted with swaged lower ends to half-inch bronze rigging screws.
- Running rigging is colour coded.
- Main halyard, topping lift, vang led aft to cockpit.
- Yankee and staysail halyards cleated off at mast.
- Yankee and Staysail sheets.
- Spectra check stays for heavy weather.
- Lazy jacks, burgee and signal halyards.
- SS chain plates, through fixed to hull and attached to GRP webs.
- SS Fore and backstay fittings through bolted to hull.
- Removable inner forestay from masthead.
- 10ft genoa tracks and cars.
- Second genoa halyard for staysail through clutch at mast.
- Spinnaker halyard inc. 2 x Harken blocks, masthead and base.
- Stylock fitting for rigging.
- Mainsheet track with traveller and control lines.
- 6 x clutches on coachroof port and starboard.
- Furlex headsail furling gear.
- Furlex 200S furling drum to genoa.
- Mast steps to masthead.
- LED spreader lights
- Lewmar 1000 electric windlass, c/w up and down switches to deck.
- 2 x Anderson 28ST stainless winches mounted either side of the companionway coach roof, together with associated clutches, to control reefing and halyard lines lead aft.
- 2 x Anderson 46st stainless self-tailing sheet winches.
- 2 x Anderson 28st stainless self-tailing coach roof winches for single line reefing, main halyard, topping lift etc.
- 1 x Anderson 28 genoa halyard winch.
- Fully battened main, triple stitched with 3 reef points.
- Furling genoa, cross cut, UV protected.
- Parasailor spinnaker, with sheets and guys.
- Lazy jacks fitted.
- Main - 258ft2 / 24m2.
- No.1 Genoa - 435 ft2 / 40.4m2.
- No.2 Genoa 341ft2 / 31.7m2.
- No.1 Jib - 209ft2 / 19.5m2.
- All deck hardware is of lasting quality and rated to perform well through the severest of conditions.
- Aluminium toe rail.
- Teak seats to stern rail
- SS pushpit and pulpit.
- 27 Alloy stanchions with double lifelines.
- 2 x Deck harness lines from cockpit to pulpit.
- 2 x Cockpit harness jackstays.
- Teak handrails on coach roof.
- Lewmar Ocean hatches over forepeak, saloon and heads.
- 2 x Dorade vents.
- Aeolian vent over gallery.
- Windows in 6mm toughened glass with anodised aluminium frames.
- Diesel and water fillers marked accordingly.
- Non‐slip paint on deck and coach roof areas.
Anchoring & Mooring Equipment:
- Lewmar electric windlass
- SS stemhead fitting with twin roller.
- Rocna 20 anchor plus 55m three eighth chain, designed to self stow.
- 4 x 12” mooring cleats.
- 4 x fairleads.
- 2 x mid‐ship spring cleats.
- 2 x 16m of 14mm mooring warp.
- 4 x fenders.
- Deckwash pump
Covers, Canvas & Cushions:
- Sprayhood in sunbrella beige dune with stainless steel grab rail.
- Stack pack sail cover in sunbrella beige dune.
- Bimini is sunbrella dune
- Covers for interior cushions
- Cockpit cushions in close cell foam
- Portland Pudgie (like new) can be sailed or rowed. No outboard.
- MOM module.
- Throw ring.
- Fire extinguishers.
- Xintex propane fume detector.
The Company offers the details of this vessel in good faith but cannot guarantee or warrant the accuracy of this information nor warrant the condition of the vessel. A buyer should instruct his agents, or his surveyors, to investigate such details as the buyer desires validated. This vessel is offered subject to prior sale, price change, or withdrawal without notice.
Presented For Sale By:
Presented For Sale By: