Presented For Sale By:
|Model||Oceanis Clipper 343|
|Length||35 ft / 10.82 m|
|Location||Eastbourne, East Sussex|
|Tax Status||Tax Paid|
|LOA||35 ft 6 in / 10.82 m|
|Length at Water Line||30 ft 10 in / 9.4 m|
|Beam||11 ft 5 in / 3.48 m|
|Max Draft||6 ft 3 in / 1.9 m|
|Dry Weight||6099.99 kg|
|Drive Type||Shaft Drive|
|Fuel Tanks||75.01 litres|
|Fresh Water Tanks||255.03 litres|
A popular Beneteau Oceanis Clipper 343 - Owner's 2 Cabin Version. Wheel Steering, Deep Fin Keel, Slab Reefed Main Sail, Yanmar 3YM30 29hp Diesel Shaft Driven Engine, Electric Lofrans Anchor Windlass, Upgraded Raymarine Electronics - Hybrid Touch Plotter, Wind Instrument, Tridata Instrument, Linear Ram Auto Pilot, New Canvas Sprayhood on order and benefits from Eberspacher Cabin Heating.
12th February 2020 - New Listing & Full Details to Follow Shortly.
Beneteau Oceanis Clipper 343 - Description
Designed by Jean Berret & Olivier Racoupeau and built by Beneteau in Chalon, France.
LOA: 10.82 mtrs / 35'5"
LWL: 9.40 mtrs / 30'8"
BEAM: 3.48 mtrs / 11'4"
DRAFT: 1.90 mtrs / 6'2"
Displacement Weight: 6,100 kgs
CE Category: A - 6 Persons
The Hull is a single skinned GRP construction with reinforced points (Keel, Rudder, Chain Plates and Hull Deck Joint) to strengthen the structure.
There is a Structural Inner Moulding which is bonded and laminated to the Hull. Its structural role is important as it takes and absorbs the stresses at pressure points (shroud chain-plate tie rods, keel and rudder) and spreads any loads guaranteeing reduced strain on the hull.
The stainless steel propeller shaft is mounted and protected in a GRP skeg.
The Deck is a sandwich construction (GRP and Balsa Core) for an optimal strength / weight ratio, thermal and sound insulation.
The decks also have a diamond point non-slip surface increasing safety for movement on the decks.
Yanmar 3YM30 29 hp Diesel Shaft Driven Engine.
Cruising Speed: 5 knots
Maximum Speed: 7 knots
Engine Hours: TBA
Engine Last Serviced: April 2019
Fuel Tank Capacity: 75 Ltrs / 16.5 Gallons.
Engine Bay Automatic Fire Extinguisher.
This is the Owner's 2 Cabin Version comprising of an Aft Cabin on the Port Side with a large Double Berth, Opening Port Hole into Cockpit, Storage Wardrobe and Battery Isolators.
As you enter the boat via the companionway steps there is a Galley situated on the Port Side equipped with a 2 Burner Gas Hob, Gimballed Oven, Stainless Steel Sink, Mixer Tap with Hot & Cold Pressurised Water, 12v Fridge and Storage Cupboards.
Opposite the Galley is a Heads equipped with a Moulded Wash Basin, Chrome Mono Bloc Hot & Cold Pressurised Water Tap, Shower, Storage Cupboards, Light and opening Port Hole.
The main Saloon has Bench Seating on either side with a fixed centre table with folding leafs and bottle storage. There is also a Chart Table with the main electrical switch panel and Raymarine VHF Radio.
Further forward is a forecabin with a Double V Berth, Opening Ventilation Deck Hatch, Reading Lamps and Storage Cupboard. Head Height 1.86 mtrs.
Eberspacher Cabin Heating.
Joinery finished in a fruit-tree coloured wood and beige patterned upholestry.
Saloon Head Height 1.86 mtrs.
The cockpit is a generous size which has a swivelling wheel providing easy access especially when moored stern too.
Plastimo Steering Compass.
Lofrans 1000w Electric Anchor Windlass, Anchor & Chain.
Lofrans Anchor Chain Controller & Counter.
Raymarine Hybrid Touch Chart Plotter.
Raymarine S100 Auto Pilot - Linear Hydraulic Ram.
Remote Raymarine Auto-Pilot Controller on Lanyard.
Raymarine Wind Instrument.
Raymarine Multi-Function Display (Depth, Speed & Log).
Raymarine VHF Radio
BM1 Battery Monitor.
Sterling Power Display.
CMD Stereo Disc / AM / FM / Aux Player with Cockpit Control Unit & Speakers.
Slab Reefed Main Sail.
Blue Canvas Main Sail Cover.
Furling Genoa System.
Swivelling Steering Wheel.
Blue Canvas Binnacle Cover.
2 x Harken 40 Self Tailing Genoa Winches.
2 x Harken 32 Self Tailing Winches on Coachroof.
5 x Clutches on Starboard Side Coachroof.
5 x Clutches on Port Side Coachroof.
Adjustable Genoa Cars.
Sprayhood currently being manufactured.
240v Shore Power, Cable & Battery Charger.
12v Batteries Number & ah TBA.
Warps & Fenders.
Yellow House Shoe Rescue Buoy.
Beneteau Oceanis Clipper 343 - Broker's Comments
This boat has had 3 owners from new and the current owners have owned the boat since TBA.
The boat was last lifted out for maintenance works in February 2019.
A really nice example.
I : 43.44 ft
J : 12.80 ft
P : 39.14 ft
E : 13.58 ft
Working Sail Area : 649.06 sq ft
The Company offers the details of this vessel in good faith but cannot guarantee or warrant the accuracy of this information nor warrant the condition of the vessel. A buyer should instruct his agents, or his surveyors, to investigate such details as the buyer desires validated. This vessel is offered subject to prior sale, price change, or withdrawal without notice.
Presented For Sale By:
Presented For Sale By: